Instructions Search (87 results)

This board will definitely help you to build your DIY guitar pedal in the 1590B enclosure. Just built your effect circuit on the preperforated area of the PCB. Led, jacks and footswitch are mounted on the PCB, being only necessary to wi

The most popular DIY high-gain distortion pedal is here. The Brown Sound In A Box version 2 (BSIAB2) is the excellent distortion pedal. It performs Marshall-type distortion that sounds great with low or high drive.

This popular DIY pedal produces the dynamic feeling and harmonics typical of tube amps. It has a switch to control the overdrive brightness.

This simple and effective buffer improves the high frequency degraded by long cables or pedal chains.

Simple setup that works with the HC-SR04 ULTRASONIC RANGE SENSOR

Flashes an led when mail is delivered

An Arduino on a breadboard.

Bluetooth controlled intervalometer for doing time lapse photography with your canon DSLR.

The Dual Loop allows you to alternate between two different effect loops. It provides two switchable loops (send / return) with a single foot switch.

The Tubescreamer is probably the most built overdrive pedal in the DIY community. The pedal has a characteristic mid-boosted tone perfect for soft rock and blues.

A tutorial to help you understand how a shift register works.

A Mini Guitar Amp Using The LM386 IC

An Ultra-Bright White LED Strobe Light

A Strobe Light Using The 8x8 Red Dot Matrix LED Display

A cool LED flashlight with an ultra long battery life.

This is the RAT, one of the most popular distortion effects. It performs very nice high-gain distortion suitable for metal, grunge or rock.

This is the Fuzz Face, the legendary fuzz distortion pedal. With this PCB you can build the original or many other variants using either Germanium or Silicon transistors.

This preamplifier with JFET transistor sounds great. It operates in similar manner to vacuum tubes. The circuit is very simple to build and can be used as a booster.

This board will help you to build your DIY guitar pedal in the 1590B enclosure. Led, jacks and footswitch are mounted on the PCB, being only necessary to wire the battery and the effect PCB.

This is the classic Guv’nor, a high-gain distortion pedal. It has a vintage valve amp sounding, with a wide range of distortion and three knobs to control the tone. It is a perfect pedal for blues, rock or metal.

Distortus Maximus is a high-gain distortion pedal with three-band equalization. It produces rich harmonics and massive amount of gain ideal to play metal.

The Purple Plexi is a powerful distortion pedal with plexi-style amps tone. It is very dynamic and touch-sensitive distortion, perfect for rock music.

EP Booster is perfect to boost the guitar adding some sparkle and definition.

This PCB is placed on the base of the 3PDT footswitch. It will help you to wire all the components of the pedal, keep a neat circuit and reduce the noise.

The Fuzz Factory is a five-knob fuzz pedal with huge range of sound possibilities. This is classic DIY pedal project that can be built with either germanium or silicon transistors.

This is the One Knob Fuzz, a high gain fuzz with a very smooth response. This pedal is a classic DIY project, it is very easy to build and has a great fuzz sound.

The COT 50 gives a boost to the guitar with a unique tube-like sound. It can be used as a clean boost, crunch boost or overdrive. It has only one knob to control the amount of gain.

The Electra Distortion is a simple and great overdrive/distortion pedal that emulates the tone of a cranked Tweed amp.

This pedal is a classic booster DIY project. You can use it to add treble or to overdrive the amp with a great sound.

This treble booster is the Screaming Bird. It is a Linear Power Booster tuned for highs. Whether it's overdriving an amp or just adding some highs, it will make your guitar cut through any mix.

This bass booster is the Hog's Foot or Mole. It is a Linear Power Booster tuned for bass.

USB CHARGER KIT: Charges USB Devices