Linear Power Booster

This pedal is the original LPB booster that introduced the overdrive era in 1968. Use the LPB to obtain extra boost and definition to any pedal effect. This pedal will definitely increase the gain and saturation of your amp.
Steps
  1. Overview
  2. DESIGNATORS AND COMPONENTS
  3. PCB ASSEMBLY
  4. ENCLOSURE AND WIRING
Categories
Tayda Electronics Kits, DIY Projects, DIY Guitar Effects
Created by DHEA
Status: Active
Cfbfe5913a91eb0b73dda7d6f6ecab58?s=30

Linear Power Booster Step 1 of 4

Dha8_assembled

Effect type: boost

Pedal description

This pedal is the original LPB booster that introduced the overdrive era in 1968. Use the LPB to obtain extra boost and definition to any pedal effect. This pedal will definitely increase the gain and saturation of your amp.

Controls

  • Gain: controls the gain

Kit contents

Capacitors    
2x     150NF 0.15UF 100V 5% MYLAR FILM CAPACITORS
Transistor    
1x     2N5088 NPN GENERAL PURPOSE TRANSISTOR
Resistors    
1x     1M OHM 1/4W 1% METAL FILM RESISTOR
1x     470K OHM 1/4W 1% METAL FILM RESISTOR
1x     47K OHM 1/4W 1% METAL FILM RESISTOR
1x     390 OHM 1/4W 1% METAL FILM RESISTOR
1x     10K OHM 1/4W 1% METAL FILM RESISTOR
1x     2.2K OHM 1/4W 1% METAL FILM RESISTOR
Potentiometer    
1x     100K OHM LINEAR TAPER POTENTIOMETER
Others    
1x    GUITAR BOOST DIY PCB GUITAR EFFECT
1x    1590B STYLE ALUMINUM DIECAST ENCLOSURE
1x    3MM BEZEL LED HOLDER CHROME METAL
1x    LED 3MM RED
1x    9V 9-VOLT BATTERY CLIP / CONNECTOR SNAP
1x    DC POWER JACK 2.1MM ENCLOSED FRAME WITH SWITCH
1x    6.35MM 1/4" MONO CHASSIS SOCKET / JACK
1x    6.35MM 1/4" STEREO CHASSIS SOCKET / JACK 3 TERMINALS
1x    3PDT STOMP FOOT / PEDAL SWITCH
1x    DAVIES 1510 CLONE BLACK KNOB
1x    AWG 22 BLACK HOOK-UP WIRE 1FT (30CM) STRANDED            
1x    AWG 22 RED HOOK-UP WIRE 1FT (30CM) STRANDED            
1x    AWG 22 WHITE HOOK-UP WIRE 1FT (30CM) STRANDED  

Check Out The Forum

Next Page >>

Products