Box of Metal

The Box of Metal is a high-gain distortion pedal designed for metal and hard rock. It incorporates a three-knob EQ for tone control.
Steps
  1. Overview
  2. Designators and components
  3. PCB assembly
  4. Enclosure and wiring
  5. Enclosure drilling
Categories
Tayda Electronics Kits, DIY Projects, DIY Guitar Effects
Created by DHEA
Status: Active
6ad5cfedb16d6a272994ad5c2b2b82c7?s=30

Enclosure drilling Step 5 of 5

Choose a 1590BB enclosure and use the custom drilling service. For personalized artwork, use the UV printing service. Add the coordinates from the following table into the online tool at drill.taydakits.com. The holes #1 to #5 are for the 1590BB enclosure PCB.

 

 

Adjust the diameter of hole #3 for the DC connector (9 mm works for most of the connectors).

Adjust the diameter of hole #5 for the LED as follows (for painted enclosures):

  • 3 mm LED: 3.2 mm
  • 3 mm LED metal holder: 6 mm
  • 5 mm LED: 5.2 mm
  • 5 mm transparent holder: 6.5 mm

<< Prev Page