Orange Squeezer

The Orange Squeezer is a classic and simple DIY guitar project. This circuit provides smooth and effective compression, perfect for controlling and shaping your guitar's dynamics.
Steps
  1. Overview
  2. Designators and components
  3. PCB assembly
  4. Enclosure and wiring
  5. Enclosure drilling
Categories
DIY Projects, DIY Guitar Effects
Created by DHEA
Status: Active
6ad5cfedb16d6a272994ad5c2b2b82c7?s=30

Enclosure drilling Step 5 of 5

Choose an enclosure and use the custom drilling service. For personalized artwork, use the UV printing service. Open this drilling template or add the coordenates from the following table into the online tool at drill.taydakits.com. The holes #1 to #5 are for the 1590B enclosure PCB.

 

Adjust the diameter of hole #3 for the DC connector (9 mm works for most of the connectors).

Adjust the diameter of hole #5 for the LED as follows (for painted enclosures):

  • 3 mm LED: 3.2 mm
  • 3 mm LED metal holder: 6 mm
  • 5 mm LED: 5.2 mm
  • 5 mm transparent holder: 6.5 mm

<< Prev Page