AC RC Booster SMD

The AC Booster and RC Booster are legendary pedals, known for smooth overdrive and transparent clean boost. Build your own version with this pre-assembled PCB.
Steps
  1. Overview
  2. PCB
  3. Enclosure and wiring
  4. Drilling template
Categories
Tayda Electronics Kits, DIY Projects, DIY Guitar Effects
Created by DHEA
Status: Active
6ad5cfedb16d6a272994ad5c2b2b82c7?s=30

Drilling template Step 4 of 4

Choose a 1590B enclosure and use the custom drilling service. For personalized artwork, use the UV printing service. Add the coordinates from the following table into the online tool at drill.taydakits.com. The holes #1 to #5 are for the 1590B enclosure PCB.

 

Adjust the diameter of hole #3 for the DC connector (9 mm works for most of the connectors).

Adjust the diameter of hole #5 for the LED as follows (for painted enclosures):

  • 3 mm LED: 3.2 mm
  • 3 mm LED metal holder: 6 mm
  • 5 mm LED: 5.2 mm
  • 5 mm transparent holder: 6.5 mm

<< Prev Page