Modular PSU

Triple rail regulated power supply for any modular synth with little distribution board.
Steps

Created by EsKey
Status: Active
D1a113d091137f06b61515f6351e1009?s=30

Assembly Step 3 of 3

For assembling you will need

  • pcb and components
  • soldering iron
  • flux and solder
  • transformer 220(110)-24-24
  • multimeter
  1. install all components
  2. bend their legs
  3. cut legs
  4. use flux to make your soldering pretty
  5. solder
  6. connect transformer to input
  7. power on (be careful to prevent electronic damage of youself!)
  8. measure output voltage with multimeter and set potentiometers to get voltages you need