Distortus Maximus

The Distortus Maximus is a simple and very popular DIY project that offers high-gain distortion with three-band equalization. It produces rich harmonics and a massive amount of distortion, making it ideal for metal.
Steps
  1. Overview
  2. Designators and components
  3. PCB assembly
  4. Enclosure and wiring
  5. Enclosure drilling
Categories
Tayda Electronics Kits, DIY Projects, DIY Guitar Effects
Created by DHEA
Status: Active
6ad5cfedb16d6a272994ad5c2b2b82c7?s=30

Enclosure drilling Step 5 of 5

Choose a 1590BB enclosure and use the custom drilling service. For personalized artwork, use the UV printing service. Add the coordinates from the following table into the online tool at drill.taydakits.com. The holes #1 to #5 are for the 1590BB enclosure PCB.

 

Adjust the diameter of hole #3 for the DC connector (9 mm works for most of the connectors).

Adjust the diameter of hole #5 for the LED as follows (for painted enclosures):

  • 3 mm LED: 3.2 mm
  • 3 mm LED metal holder: 6 mm
  • 5 mm LED: 5.2 mm
  • 5 mm transparent holder: 6.5 mm

<< Prev Page

Products